[omc-boats] OMC Trailer

From: Kenneth Fingerlos <kenf@...>
Date: Sun, 04 Feb 2007 15:21:57 -0800

Hello -

I've got a 1969 Seasport-II on the factory OMC Trailer ... which is what I'm going to ask about.

Seems at some-point in history somebody decided to replace one of the hubs on the trailer. When the did, they did not replace it with one which had the disc brake setup.

They also removed the caliper which would have engaged with that disc, and plugged the hydraulic line.

My questions -

1.) Is it possible to find the original hub and disk caliper for these things? Any advise as to doing so?

2.) Aside from the change in ride height .. what would be involved in converting over to standard 15" rims and tires? This may actually also help with a loading problem I have which is due to the angle of the local boat ramps being very steep; but if this is a bad arrangement then perhaps I won't persue it.



To get off this list send mail to omc-boats-unsubscribe@...
Received on Sunday, 4 February 2007

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT