Re: [omc-boats] running while in tilt position

From: David <odin@...>
Date: Wed, 27 Apr 2005 05:52:59 -0700

The cooling should not be effected - if overheating occurs it would be
from a poor impeller or circulating pump not a raised sterndrive. Also,
having worked for OMC Boats, testing boats in engineering, I can tell
you it takes a very long time to wear out the knuckles. Running with the
drive up is ok, but should be at idle speed or slightly above. Dave

Glenn Halweg wrote:

> Another issue I haven't seen addressed while running engine while
> tilted is the lack of water circulation for cooling the engine.

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Wednesday, 27 April 2005