Re: omc-boats-digest V1 #140

From: bill.parkinson@...
Date: Tue, 30 Mar 2004 04:18:17 +0000

I know you guys want to keep the original top... good idea.... however, if you want to see my sweet 16 with a bimini top from iboats.com check out the gallery picture.... the original top that was on mine was tooooo confining.... the bimini opens it up considerably plus I can stand up while driving.... slides on side rails and folds to rear when not in use....

Must be getting into boat season with all of these emails.... been pretty dead over the past copule of months...

Thanks

Bill parkinson
>
> I am guessing about your Sportaman but my Rogue has snaps that run the
> periphery of the rear edge of the passenger compartment and up the sides and
> most of these are for snap in clear plastic pieces to completely enclose the
> entire passenger area utilizing the top as a roof. I still have all the
> plastic but my roof is shrunken and torn and not really usable. There are
> side curtains and a rear piece and they snap in at the bottom and zip up the
> sides. Look on the edges of your top and see if there is one side of a
> zipper running up the sides and at the back. I have been trying to figure
> out a way to reproduce the top. They are not available to my knowledge. The
> people at Pfefferkorn who make the mooring covers said the tops were made in
> Toledo and the company is no longer in business. Pfferkorn offered to make
> one but I would have to take my boat to Sandusky Ohio to be fitted. I doubt
> they have the vinyl runner seal at the front. I've been thinking hard on it!
> Tom Klauber

> ----- Original Message -----
> From: "omc-boats-digest" <owner-omc-boats-digest@...>
> To: <omc-boats-digest@...>
> Sent: Monday, March 29, 2004 12:00 PM
> Subject: omc-boats-digest V1 #140
>
>
> >
> > omc-boats-digest Monday, March 29 2004 Volume 01 : Number
> 140
> >
> >
> >
> > 1966 Sportsman 150 Top & Covers
> >
> > ----------------------------------------------------------------------
> >
> > Date: Mon, 29 Mar 2004 06:45:24 -0700
> > From: <lib1@...>
> > Subject: 1966 Sportsman 150 Top & Covers
> >
> > This is a multi-part message in MIME format.
> >
> > - ------=_NextPart_000_00C0_01C41559.6A076A40
> > Content-Type: text/plain;
> > charset="iso-8859-1"
> > Content-Transfer-Encoding: quoted-printable
> >
> > I'm trying to duplicate the original (missing) front tonneau cover, as =
> > well as the top
> > on a 1966 Sportsman 150.
> >
> > I've pretty well figured out how to duplicate the original front tonneua =
> > cover; but

> > aan anyone help me figure out what the rear motor bulk head snaps were =
> > used for?
> >
> > I'm guessing the rear jumpseats had seat cushions? And the bulkhead =
> > snaps are there to
> > stow the top assembly when folded down and not in use?
> >
> > If anyone could snap some closeup digital photos of this detail-- I'd be =
> > grateful.
> >
> > Lee Shuster
> > Salt Lake City
> > - ------=_NextPart_000_00C0_01C41559.6A076A40
> > Content-Type: text/html;
> > charset="iso-8859-1"
> > Content-Transfer-Encoding: quoted-printable
> >
> > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > <HTML><HEAD>
> > <META http-equiv=3DContent-Type content=3D"text/html; =
> > charset=3Diso-8859-1">
> > <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
> > <STYLE></STYLE>
> > </HEAD>
> > <BODY bgColor=3D#ffffff>
> > <DIV><FONT face=3DArial size=3D2>I'm trying to duplicate the original =
> > (missing)=20
> > front tonneau cover, as well as the top</FONT></DIV>

> > <DIV><FONT face=3DArial size=3D2>on a 1966 Sportsman 150.</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
> > <DIV><FONT face=3DArial size=3D2>I've pretty well figured out how to =
> > duplicate the=20
> > original front tonneua cover; but</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2>aan anyone help me figure out what the =
> > rear motor=20
> > bulk head snaps were used for?</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
> > <DIV><FONT face=3DArial size=3D2>I'm guessing the rear jumpseats had =
> > seat cushions?=20
> > And the bulkhead snaps are there to</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2>stow the top assembly when folded down =
> > and not in=20
> > use?</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
> > <DIV><FONT face=3DArial size=3D2>If anyone could snap some closeup =
> > digital photos of=20
> > this detail-- I'd be grateful.</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>

> > <DIV><FONT face=3DArial size=3D2>Lee Shuster</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2>Salt Lake =
> > City</FONT></DIV></BODY></HTML>
> >
> > - ------=_NextPart_000_00C0_01C41559.6A076A40--
> >
> > ------------------------------
> >
> > End of omc-boats-digest V1 #140
> > *******************************
> >
> >
>
>
Received on Monday, 29 March 2004

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT