[OMC-Boats] FW: What Size Wire for Rewiring Job

From: Lee Shuster <Lee.Shuster@...>
Date: Tue, 13 Jul 2010 14:51:00 -0600

Here are some resources to get you started:

http://www.westmarine.com/webapp/wcs/stores/servlet/WestAdvisorView?langId=-1&storeId=11151&catalogId=10001&page=Marine-Wire

and

http://beta.circuitwizard.bluesea.com/

I also recommend reading these books:

http://www.amazon.com/12-Volt-Bible-Boats-Miner-Brotherton/dp/0071392335

and

http://www.amazon.com/Boatowners-Illustrated-Electrical-Handbook-Charlie/dp/0071446443/ref=pd_cp_b_2

One of the best upgrades for adding reliability to your OMC boat will be to repair and replace the wiring. You'll know the jobs done right if you DIY and it's not all that difficult. Good luck.

Lee

________________________________
From: omc-boats-bounces@... [mailto:omc-boats-bounces@...ultimate.com] On Behalf Of Nexi
Sent: Monday, July 12, 2010 9:53 AM
To: omc-boats@...
Subject: [OMC-Boats] What Size Wire for Rewiring Job

I'm about to rewire everything under the dash and the engine compartment. I'm a bit stumped on what gauge wire would be best to use.
Received on Tuesday, 13 July 2010

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT