Re: [OMC-Boats] Stern Drive Rebuild

From: Don Mandelas <dmandelas@...>
Date: Wed, 19 Aug 2009 20:57:04 -0700

Hi Bill,

 

I apologize for calling you Scott in the earlier message.

There have been so many messages comming in lately from this forum that I got confused.

 

Anyway,

 

Thankyou for sending the photos of you outdrive stand.

I'll be sure to make one the next time I work on my unit.

It will be easier repairing the unit on the stand than on the table in my garage.

 

And, Congratulations for accomplishing all the projects you have done on your boat.

I'm impressed with all the repairs you have done and I have enjoyed reading your messages (keep them coming).

 

Again thanks!

Don.
 

Date: Tue, 18 Aug 2009 15:37:24 -0700
From: bldfw@...
To: omc-boats@...
Subject: Re: [OMC-Boats] Stern Drive Rebuild

Hey, I'm not Scott but here's what I whipped up out of scrap wood. The top edge is built tall enough that the lower unit fins rest on the top allowig the skeg to clearn the floor. The outdrive just slides in (where you see the green). Pretty simple.
 
-Bill
Dallas, TX
1970 Evinrude Explorer - 155 Buick V6 - OMC Sterndrive
http://www.photobucket.com/evinrude_explorer

--- On Tue, 8/18/09, Don Mandelas <dmandelas@...> wrote:

From: Don Mandelas <dmandelas@...>
Subject: Re: [OMC-Boats] Stern Drive Rebuild
To: "Evinrude & Johnson Boats of the 1960's and 70's" <omc-boats@...mate.com>
Date: Tuesday, August 18, 2009, 5:04 PM

Scott,
 
I'm very interested in your Stern drive stand made from scrap 2 x 4's.
Please send photos and directions on how to build.
 
That seems to be the first thing needed after removing the stern drive unit from the boat.
 
Thanks
Don.
 

From: scottveazie@...
To: omc-boats@...
Date: Tue, 18 Aug 2009 13:24:06 -0700
Subject: Re: [OMC-Boats] Stern Drive Rebuild

I've done my own repairs to the upper unit, mainly punching out the plug that is installed when trucourse is not used. For work on my stern drive, I remove it from the boat and slide it into a wooden stand I built. With this stand I've replaced three impellers (from three different boats), installed trucourse steering from my old burnt up drive, and even done painting. These drives are EASY to work on, the books are great, and having some mechanical ability does help. But I found it very easy and straight forward.
 
If anyone wants my procedure for knocking out the dummy plug on drives that used tiller arm push pull rack and pinion, or if they'd like pictures or dimensions of how to build your own sterndrive stand, let me know. It's built from scrap 2x4's.
 
~Scott
 

From: dmandelas@...
To: omc-boats@...
Date: Tue, 18 Aug 2009 12:55:55 -0700
Subject: [OMC-Boats] Stern Drive Rebuild

 
I have been following Andy’s messages lately (forward clutch not working) and it raises questions that I have had for some time.
 
How many of us on this list have themselves rebuilt the lower or upper unit on their OMC Stern Drive?
 
I ask this question because I am noticing that as our stern drive units get older there are less and less mechanics who know how to work on them, or who are willing to work on them.
 
Lately it seems that the ones who are willing to work on them can charge a very high price. Paying the high price is a great way to go for those who can afford to pay it. But for those who HAVE MECHANICAL ABILITIES, and who either would like to work on the unit them self, or who will eventually be forced into working on the unit them self, we will then need some sort of OMC on line stern drive rebuild clinic in order to
repair the units.
 
Now I have read my OMC service Manual and have used my OMC parts manual in order to make repairs on my lower unit. While making the repairs I noticed that I ran into problems with what the book described I needed to do and what I actually had to do. My repairs went well but I’m sure my strategy of repairing the unit can be improved upon. So....now, I humbly ask questions from those of you who have actually made repairs.
 
My first questions are these;
 
How many on this list have them selves made repairs on their lower or upper unit?
 
What was your overall experience?
 
In your opinion what is the best way to remove the lower unit in order to work on it at home?
 
Is there an OMC Stern Drive Training center, If so where is it?
 
"That’s all I want to know at this time"
Thanks,
Don
 
 

Get back to school stuff for them and cashback for you. Try Bing™ now.

Windows Live: Make it easier for your friends to see what you’re up to on Facebook. Find out more.

Windows Live: Make it easier for your friends to see what you’re up to on Facebook. Find out more.
-----Inline Attachment Follows-----

_______________________________________________
OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats

_________________________________________________________________
Get back to school stuff for them and cashback for you.
http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_BackToSchool_Cashback_BTSCashback_1x1
Received on Thursday, 20 August 2009

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT