Re: [omc-boats] Parts sites/catalogs, and tilt Q

That site didn't have a picture, but I cross-referenced the part # and found
one at the link below....sure looks like it. Thanks, Glenn! For $15, I may
pick one up for a spare, just in case.

http://marineengineparts.com/15%20starters%20&%20alternators%20page%2070-79.pdf#search='MES1938M'

----- Original Message -----
From: "Glenn comcast" <glennhalweg@...>
To: <omc-boats@...>
Sent: Tuesday, September 19, 2006 7:25 PM
Subject: Re: [omc-boats] Parts sites/catalogs, and tilt Q

> The solenoids are readily available from several sources including here
> http://www.shipstore.com/SS/HTML/MES/MES1938M.html
>
> ----- Original Message -----
> From: "Andy Perakes" <aperakes@...>
> To: <omc-boats@...>
> Sent: Tuesday, September 19, 2006 6:10 PM
> Subject: Re: [omc-boats] Parts sites/catalogs, and tilt Q
>
>
> > Micah: Its been about 20 years, but I had to replace one of the
solenoids
> > for the same condition. Even way back then I couldn't get the exact
part
> > and had to settle for a substitute and modified mounting scheme. Of
> > course
> > the internet didn't exist back then so I was restricted to searching my
> > local OMC dealers. To confirm the fix, I suggest you try swapping the
> > solenoids and comfirm that the "won't go up" problem becomes a "won't go
> > down" problem. If needed, I can check the replacement part on my boat
to
> > see if there is a manufacturer/part # on it for you. Good luck.
> >
> > Andy
> > 1967 Johnson Reveler
> >
> > ----- Original Message -----
> > From: "Micah Donahue" <mdonahue@...>
> > To: <omc-boats-digest@...>
> > Sent: Tuesday, September 19, 2006 8:20 AM
> > Subject: [omc-boats] Parts sites/catalogs, and tilt Q
> >
> >
> >> Thanks, all, for the links. Very helpful.
> >> Quick newbie Q for Glenn -- do we want the Johnson/Evinrude catalog
> >> or the OMC catalog? This always confuses the hell out of me.
> >>
> >> One other thing --
> >> My power tilt will go down but not up. I'm having the motor rebuilt,
> >> but it's likely to be the solenoid mounted to the intermediate
> >> housing (or connections to it), correct? Anyone know offhand which of
> >> the suppliers is best for a replacement set of these (might as well
> >> do both and have a working spare)?
> >>
> >> Cheers,
> >> -Micah
> >>
> >> Manchester, MA
> >> 1968 Sportsman 120 w/ 155
> >>
> >>
> >> >
> >> > From: owner-omc-boats@... [mailto:owner-omc-
> >> > boats@...] =
> >> > On
> >> > Behalf Of Glenn comcast
> >> > Sent: Monday, September 18, 2006 5:06 PM
> >> > To: omc-boats@...
> >> > Subject: Re: [omc-boats] (no subject)
> >> >
> >> > =20
> >> >
> >> > Dave,
> >> >
> >> > =20
> >> >
> >> > HYPERLINK "http://glmmarine.com/"http://glmmarine.com/ still =
> >> > manufactures
> >> > manifolds for the old engines also many other parts including
> >> > impellers.
> >> > They don't sell to the public but if you go to their web site you
> >> > can =
> >> > order
> >> > for free a very nice 600 page catalogue along with a 100 page
manifold
> >> > supplement. They have literally 1000's of cross reference's their
part
> >> > number to OMC, Johnson and Evinrude. You look at their whole
catalogue
> >> > online but it's in PDF and not very user friendly. Almost any on-
> >> > line =
> >> > store
> >> > I've purchased from the part comes in a GLMMarine bag or box. I've
> >> > seen =
> >> > the
> >> > same part in one store for $99 and in another for $49. The deals
> >> > are out
> >> > there if you look for them.=20
> >> >
> >> > =20
> >> >
> >> > What I do is look up the part number I need in the catalogue then
> >> > google =
> >> > it.
> >> >
> >> > =20
> >> >
> >> > Glenn =20
> >> >
> >> >
> >>
> >>
> >> -----
> >> To get off this list send mail to omc-boats-unsubscribe@...
> >>
> >
> > -----
> > To get off this list send mail to omc-boats-unsubscribe@...
>
> -----
> To get off this list send mail to omc-boats-unsubscribe@...
>

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Tuesday, 19 September 2006