Re: [omc-boats] Intermediate Gearcase

From: David <odin@...>
Date: Tue, 29 Aug 2006 11:00:53 -0500

Ken, It is pretty easy to replace the seals - pull the drive off and
there are three bolts holding the cover plate on - take the plate off
and the drive shaft should come right out. The rear seal is right there
- and the inner seal will be visable as well. Dave

David T. Detrick wrote:

>
>Kenneth
>
>Please remove David Detricks name from your list. He passed away last week.
>
>Thank You, Mrs. Detrick
>
>
>
>
>
>
>
>At 10:26 AM 7/22/2006 -0700, you wrote:
>
>
>>Ok... the individual who posted about the seals on the intermeidate
>>
>>
>gearcase has me thinking....
>
>
>>I've got a lot of oil/grease showing around the exhaust on the
>>
>>
>intermediate housing... sounds like the "outer" shaft seal (based entirly
>on his posting).
>
>
>>How difficult is it to pull the shaft, and subsequently to replace the
>>
>>
>seals? I have the Seloc manual - but find it a little difficult to follow
>since it covers so many different models/variations; I'm good with tools,
>but not someone who'd take on rebuilding a transmition or gearcase. I try
>to avoid things which involve adjusting clearances via shims.
>
>
>>Kenneth
>>
>>
>>-----
>>To get off this list send mail to omc-boats-unsubscribe@...
>>
>>
>>
>>
>
>
>-----
>To get off this list send mail to omc-boats-unsubscribe@...
>
>
>
>

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Tuesday, 29 August 2006

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT