I don't know if this makes a difference, but I  have a 1968 Evinrude 
Sportsman 155.  It has the older outdrive that  requires the props with a tapered hub 
that were supposed to come on the  1967 and older boats.  I can only 
speculate, but they probably used the  older units until they ran out of them in early 
1968.  If that is not the  case, then a previous owner  of my boat must have 
changed out the newer one  for the older one, although that doesn't make much 
sense.  I'm  wondering to which outdrive the 1968 manual  refers.
 
Skip Redman
So. Calif.
 
In a message dated 12/24/2005 5:48:30 P.M. Pacific Standard Time,  
kmoore12@... writes:
Thanks!  My boat is a 69 but I'm assuming the 68 155hp is the same  correct?
Ryan
----- Original Message ----- 
From: "Ethan Brodsky"  <brodskye@...>
To: <omc-boats@...>
Sent:  Friday, December 23, 2005 11:42 PM
Subject: [omc-boats] Service manuals on  ebay
> If anyone's looking for the factory service manual for a  1967-1970 OMC
> sterndrive, there's a bunch on eBay right now.  No  bids, 2 days to go,
> opening at $10 plus shipping:
>   http://motors.search.ebay.com/_W0QQsassZnellieswholesaleshop
>
> I  see:
>  1967: 200 hp
>  1968: 120 hp, 155 hp, 185 hp,  210 hp
>  1970: 90 hp, 120 hp, 155 hp, 210 hp
>
> I  picked up the factory service manual for my boat a few weeks ago and 
>  it's
> a wonderful supplement to the aftermarket manuals.  Though  the SELOC
> and Cylmer manuals often to a better job with the "step by  step"
> instructions, the factory service manual has a lot of details  that are
> omitted in the others.
>
>  Ethan
-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Sunday, 25 December 2005
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT