RE: [omc-boats] wiring harness

Liquid electrical tape.

Gregory B. Fell

The Fell Law Firm

3300 Oak Lawn Avenue, Suite 700

Dallas, Texas 75219

972-488-8177

214-219-4218 - fax

gfell@...

  _____

From: owner-omc-boats@... [mailto:owner-omc-boats@...] On
Behalf Of Glenn Halweg
Sent: Tuesday, June 07, 2005 9:17 AM
To: omc-boats@...
Subject: Re: [omc-boats] wiring harness

I've used a 3M liquid insulating product in a similar situation for the
stator wires on my Mercury outboard. Don't have any left or I would look to
see what the product is called. Bought it at an electrical supply house.

----- Original Message -----

From: Gregory B. <mailto:gfell@...> Fell

To: omc-boats@...

Sent: Tuesday, June 07, 2005 8:58 AM

Subject: RE: [omc-boats] wiring harness

Jay,

That's a repair I will be making in the future on my '69 Sportsman, also. I
used electrical tape this spring as a temporary patch. My insulation is
just falling off also. It's not fun working in that tight compartment.
Keep me (us) posted on your job. Any lessons learned that you pass on would
be appreciated.

Gregory B. Fell

The Fell Law Firm

3300 Oak Lawn Avenue, Suite 700

Dallas, Texas 75219

972-488-8177

214-219-4218 - fax

gfell@...

  _____

From: owner-omc-boats@... [mailto:owner-omc-boats@...] On
Behalf Of Jay Huggins
Sent: Monday, June 06, 2005 10:03 PM
To: omc-boats@...
Subject: [omc-boats] wiring harness

I have a 1969 Sportsman with the V-6 and I am in need of a internal wiring
harness that goes from the rubber plug at the back of the boat to the motor
components. All I have gotten so far is not in stock anywhere. If I have to
make one I can, but a wiring diagram would work great. The wires are so
deteriated that the insulation just falls off, so I want to make sure I get
the right dolor with the right part!. Any suggestions or help out
there???????? Thanks!

                                              JAY

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Tuesday, 7 June 2005