[OMC-Boats] Flooring

From: Thomas Klauber <tklauber@...>
Date: Mon, 19 Apr 2010 19:50:29 -0400

The flooring is hard to find. Look for flooring for pontoon boats - you can
find something that will work. Indoor outdoor carpet is OK. I found some
vinyl glue down stuff several years ago - it is a close match to the
original flooring that got hard and cracked. I can look it up if you need me
to. Tom K.
----- Original Message -----
From: <omc-boats-request@...>
To: <omc-boats@...>
Sent: Monday, April 19, 2010 12:00 PM
Subject: OMC-Boats Digest, Vol 36, Issue 15

> Send OMC-Boats mailing list submissions to
> omc-boats@...
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.ultimate.com/mailman/listinfo/omc-boats
> or, via email, send a message with subject or body 'help' to
> omc-boats-request@...
>
> You can reach the person managing the list at
> omc-boats-owner@...
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of OMC-Boats digest..."
>
>
> Today's Topics:
>
> 1. '64 Deluxe Carpet and Rubber (epierson001@...)
> 2. separating engine from outdrive?how to.
> (l_ematson72807@...)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 17 Apr 2010 22:26:19 -0400
> From: epierson001@...
> Subject: [OMC-Boats] '64 Deluxe Carpet and Rubber
> To: "" <omc-boats@...>
> Message-ID: <20100417222619.g98lwmddaggo4wk8@...>
> Content-Type: text/plain; charset=UTF-8
>
> Hello Gents,
>
> I just bought a '64 Deluxe which seems to be a pretty good boat
> mechanically, but needs the usual cosmetic things. Currently the floor is
> covered with astroturf and somehow I doubt that is stock. What was the
> original floor covering and is it available?
>
> Also, the white rubber weatherstripping around the windshield is pretty
> well shot. Is there a source for that material?
>
> Based on previous posts and the boat's weight I'm going to guess that I
> have about 500 lbs of water in the foam at the stern. I assume there's no
> way to get rid of it short of cutting away the floor and digging it out.
> What type of foam should be poured in for replacement?
>
> This is a great list - lots of really helpful information to maintain
> these old girls.
>
> Thanks!
> Ed Pierson
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 17 Apr 2010 16:23:52 +0000
> From: <l_ematson72807@...>
> Subject: [OMC-Boats] separating engine from outdrive?how to.
> To: omc-boats@...
> Message-ID: <20100417162352.DTKFN.65089.root@...>
> Content-Type: text/plain; charset=utf-8
>
> i would like to know how to separate my engine from the out drive,i'm
> removing it to replace my stringers in my 255 buick v6 1969 sportsman
> greenbay wi.this one is all original n keeping it that way.safe boating
> allways...leo
>
>
> ------------------------------
>
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats
>
>
> End of OMC-Boats Digest, Vol 36, Issue 15
> *****************************************
Received on Monday, 19 April 2010

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT