[OMC-Boats] 1970 Seasport Instrument Question

From: Ted Robinson <tederobinson@...>
Date: Mon, 9 Mar 2009 13:33:14 -0700

Lee & Ethan

Thank you very much for the help and ideas for my water temp problem.
I never would have thought of the water line as a possible adaption for water temp.
I got all my brass fittings and gauge this AM, to mount the sender in one of the exit lines at the thermostat housing.
On the way home I remembered that on the starboard side of my V-6 block, the drain cock was extended out about 6" from the block on a metal tube., (brass I hope). So I thought if I could incorporate a brass tee at that point for the temp probe, the reading could be more accurate. What do you think?
I notice the extension tube while doing some rewiring at the starter & solenoid, and thought maybe it was to drain past the wire loom that runs along the top edge of the oil pan on that side of the engine.

Thanks again

Received on Monday, 9 March 2009

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT