Re: [omc-boats] 225 engine question

From: lib1@...
Date: Mon, 19 Mar 2007 07:53:45 -0600

The "Shields" are baffles for the valve cover vent breathers, which vent crankcase fumes back to the fire arrester (carb) via hoses.

The PORT (nearest the distributor side) valve cover should be the one with the OIL filler cap, which will locate aft nearest the stern.

Hope I've answered your questiom.

Lee Shuster
  ----- Original Message -----
  From: Ryan Moore
  To: omc-boats@...
  Sent: Sunday, March 18, 2007 6:13 PM
  Subject: [omc-boats] 225 engine question

  Under the valve cover is these metal shields. I know the one on the left is correct because I didnít remove the bolt. I canít seem to get the bolts on the right head to line up so I tried it in the bottom two bolt holes. Is this correct? Here is a pic.

  No virus found in this outgoing message.
  Checked by AVG Free Edition.
  Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007 12:33 PM

To get off this list send mail to omc-boats-unsubscribe@...
Received on Monday, 19 March 2007

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT