RE: [omc-boats] Tilt motor coupling

From: knight <knight@...>
Date: Sat, 29 Jul 2006 23:08:27 -0600

Hi Scott.
I think the hammer Blow keeps your out drive from busting the shaft. You
know how sometimes your out drive can bounce when going down. That puts a
lot of dynamic load on the motor shaft.

-----Original Message-----
From: owner-omc-boats@... [mailto:owner-omc-boats@...] On
Behalf Of Scott E. Veazie
Sent: Saturday, July 29, 2006 10:30 PM
To: omc-boats@...
Subject: [omc-boats] Tilt motor coupling

I replaced my tilt motor today, and I think I'm missing something. I see
that both the motor and the worm gear shaft are slotted, and I was reading
about a hammer blow coupling? I can't find it, maybe I dropped it in the
bilge or maybe mine is busted, anyone know exactly how this works?

~Scott

-----
To get off this list send mail to omc-boats-unsubscribe@...

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Sunday, 30 July 2006

This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT